- After using usb commands in U-Boot, Linux might fail to detect USB devices.
- Workaround: Reset the module before booting Linux. This can be done using the power button or the U-Boot command reset.
- While using the CB-T3 baseboard or the SB-T35 baseboard, with alternate boot selected, and the MMC card is not present in the socket, the boot process will default to the CM-T3530 primary storage (NAND flash), but U-Boot will still expect to find the environment in the MMC card.
- Workaround: Use the env device command to switch to the primary CM-T3530 storage:
> env device nand import
|
