CM-T3730: Linux: Known Issues

From Compulab Mediawiki
Revision as of 10:09, 4 September 2012 by Grinberg (talk | contribs)
Jump to: navigation, search
Input
  • Some Angstrom GUI setup utilities require superuser password, but do not accept it.
Workaround: login as root.
USB OTG
  • Sometimes the USB OTG port fails to transition from Host mode to Peripheral mode.
Workaround:
  • Unplug the USB cable from the CM-T3730 USB OTG port
  • Remove the USB Gadget driver module from the kernel:
root@cm-t3730:~# modprobe -r g_ether
  • Load the USB Gadget driver module again:
root@cm-t3730:~# modprobe g_ether
  • Plug the USB cable back to CM-T3730 USB OTG port