Difference between revisions of "CM-X300: WinCE: Setting Up a Console"
(No difference)
|
Latest revision as of 08:52, 15 March 2010
Take the following steps to setup a console for CM-X300
- Connect the CM-X300 to your desktop serial port with a cable is supplied in the evaluation kit. If your desktop does not have a serial port, it is possible to use a standard USB to serial adapter.
- Open Windows Hyper Terminal, and configure the connection with the following settings:
- Baud rate: 38400
- Parity: None
- Data bits: 8
- Stop bits: 1