COMEX-A420: Linux: Getting started

From Compulab Mediawiki
Revision as of 06:48, 10 September 2015 by Denis (talk) (Overview)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Overview

  • The Linux package for COMEX-A420 includes a ready-to-run image that can be installed on SSD disk, mSATA card, or USB storage device connected to the SB-COMEX carrier board
  • Download the Linux Package for COMEX-A420 to the host PC and ensure the integrity of the file:
$ md5sum comex-a420_linux_2015-09-10.zip
fb0d7e1a325acdb8bc0e0a9950655400  comex-a420_linux_2015-09-10.zip
  • Unzip the downloaded archive.

Installation

  • Prepare either an SSD disk, mSATA card, or USB storage device. It must have at least 8GB capacity
  • Connect the storage device to the host PC
  • Run this command to figure out what device name was assigned to your storage device:
$ ls -all /dev/disk/by-id/
  • Assuming your storage device was detected as /dev/sdx write the image onto it:
$ gzip -dc /path/to/comex-ic40d-linux/images/comex-ic40d.mint17.8GB.dd.gz | sudo dd of=/dev/sdx bs=1MB
  • Connect the storage device to the SB-COMEX carrier board

Welcome to Linux Mint 17 LTS

  • Power on the COMEX-A420 evaluation system.
  • On first boot choose your language, timezone, username, password etc.

See also