IOT-GATE-iMX8: Getting Started

From Compulab Mediawiki
Revision as of 15:20, 6 February 2023 by Igor (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Quick Setup

  • Connect micro USB cable between host PC and IOT-GATE-iMX8 micro-USB console connector.
  • Insert the AC power-supply blade into the power supply unit.
  • Insert the power supply plug into the IOT-GATE-iMX8 DC input jack. Turn the power plug clockwise to lock the plug.
  • On your host PC, start a terminal emulation program (such as HyperTerminal) with the following serial port settings:
Baud Rate Data Bits Stop Bits Parity Flow Control
115200 8 1 none none
  • Plug the power supply unit into an AC outlet. IOT-GATE-iMX8 will turn on and boot into Linux.
  • To login into Linux use "compulab" as username and set the password per first login instructions.

IOT-GATE-iMX8 Overview

Front and Rear panels

Iot-gate-imx8 front-and-back-panels.png

Left and Right panels

Iot-gate-imx8 left-and-right-panels.png


Service bay

Iot-gate-imx8 service-bay.png

Additional Resources


Useful How-To Videos


SIM card installation
I/O module replacement
VESA / wall-mount bracket installation
DIN rail bracket installation