SB-SOM: Connectors: J6 and J8

From Compulab Mediawiki
Revision as of 10:50, 23 May 2016 by Grinberg (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Description

SB-SOM top view
SB-SOM top view
SB-SOM bottom view
SB-SOM bottom view

Connectors J6 and J8 are the main DC power supply inputs. The main DC power supply connector is always available with SB-SOM. Either J8 or J6 connector is populated (never both), depending on SB-SOM specific assembly configuration.

Admolition note.png Please refer to SB-SOM carrier board schematics and system-on-module hardware reference manual for pin functions, connector pinout and other details on your specific system.
Absolute maximum ratings
Parameter Minimum Typical Maximum
Voltage input at J8 / J6 connector 5.3V 12V 16V

Connector Data

  • J8 is a 5.5/2.5mm (ext/int Diameter) connector with plug detection mechanism.
J8 connector
Manufacturer MFG P/N
Sinotech SJDC021-L
J8 compatible plug (typical)
Outer ring dia. Inner ring dia. Length (after molding) Ground ring
5.5+/-0.1mm 2.5+/-0.1mm 8.5+/-0.5mm Outer
  • J6 is a 3.9/1.3mm (ext/int Diameter) connector with plug detection mechanism.
J6 connector
Manufacturer MFG P/N
Contact Technology DC-022 1.3mm pin
J6 compatible plug (typical)
Outer ring dia. Inner ring dia. Length (after molding) Ground ring
3.5+/-0.1mm 1.35+/-0.1mm 8.5+/-0.3mm Outer