SB-iMX8: Connectors: P12

From Compulab Mediawiki
Revision as of 12:07, 9 January 2018 by Gaby (talk) (New page: == Description == <!--thumb|right|alt=SB-SOM top view|<div align="center">SB-SOM top view</div> [[Image:SB_SOM_bottomview2.jpg|thumb|right|alt=SB-SOM bottom v...)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Description

P12 is a standard microUSB2.0 connector designed to enable serial console communication between the system and your host PC using the USB interface. The following parameters determine whether serial console through P12 is enabled.

  1. USB host power availability (through USB cable at connector P12).
  2. Jumper E3 setting.

LED DS3 indicates whether the USB console interface is enabled.


Admolition note.png Please refer to USB console guide for setup of serial communication with your board through USB.
Admolition note.png Please refer to SB-iMX8 carrier board schematics and system-on-module hardware reference manual for pin functions, connector pinout and other details on your specific system.

Connector Data

P12 connector
Manufacturer MFG P/N
Walta D03-0718-05002
P12 mating plugs
Manufacturer MFG P/N
standard micro-USB2.0 plug