SBC-IOT-iMX8: Getting Started

From Compulab Mediawiki
Jump to: navigation, search

Quick Setup

  • Connect micro USB cable between host PC and the SBC-IOT-iMX8 micro-USB debug console connector.
  • Insert the AC power-supply blade into the power supply unit.
  • Insert the power supply plug into the SBC-IOT-iMX8 DC input jack.
  • On your host PC, start a terminal emulation program (such as HyperTerminal) with the following serial port settings:
Baud Rate Data Bits Stop Bits Parity Flow Control
115200 8 1 none none
  • Plug the power supply unit into an AC outlet. SBC-IOT-iMX8 will turn on and boot into Linux.
  • Use "root" as a username and "111111" as a password as initial Linux account credentials.

SBC-IOT-iMX8 Connectors

Sbc-iot-imx8-connectors.png