Transclusion: CL-SOM-iMX7: Linux: Automatic Installation: Procedure
Revision as of 13:36, 25 November 2018 by imported>Urim
- Start terminal emulation software on your PC with the following serial port settings:
Baud Rate Data Bits Stop Bits Parity Flow Control 115200 8 1 none none
- Plug the installation media (SD/microSD card) to an appropriate socket:
- On a SBC-iMX7 evaluation system socket (P9)
- On a SBC-IOT-iMX7 evaluation system socket (P18)
- On a IOT-GATE-iMX7 socket marked uSD
- On a SBC-UCM evaluation system socket (P8)
- Turn on the evaluation system.
- The system will boot from the SD card and start the automatic installation procedure.
Kernel release : Linux 4.9.11-cl-som-imx7-5.0 ===CompuLab Automatic Installation System 2.0.0 (Mar 07 2018)=== Press any key to cancel installation 0
The Automatic Installation Procedure can be terminated by pressing any key during the timeout.
- The installation script performs all required steps including installing Linux images onto internal storage device (eMMC) and setting up the boot environment.
|
The Automatic Installation script cleans up a storage device during the installation procedure. All data stored on the eMMC device will be lost. |
=== Installation Target: eMMC === ===Installing OS=== * Updating partitions * Formatting partitions * Copying kernel files * Extracting user space rootfs.tar.bz2 158MiB 0:02:11 [1.21MiB/s] [================================>] 100% Please remove installation SD card ... Press any key to cancel restart 0 ...
- The system will reboot automatically to the newly installed Linux. Please reboot manually, if for some reason the system does not reboot automatically.
- Please remember to remove the installation SD card.
