U-Boot for CM-T335

From Compulab Mediawiki
Revision as of 11:47, 4 November 2014 by Igor (talk)
Jump to: navigation, search

The CompuLab CM-T335 System-on-Module / Computer-on-Module is using U-Boot boot-loader for low-level initializations and operating system loading. U-Boot is an open source firmware for wide range of embedded systems (e.g. PowerPC, ARM, MIPS, x86, ColdFire, AVR32, NIOS, etc.). On this page we will discuss only features and use cases related to CompuLab CM-T335 module. For more information on U-Boot, please refer to Official U-Boot Homepage.

Cm-t335-top.jpg


Resources
Evaluation
Development
Troubleshooting


News

14-Sep-2014
U-Boot update to v2014.04-cm-t335-2.2:
- DRAM configuration fine tuning
02-Apr-2014
U-Boot update to v2014.01-cm-t335-2:
- Add ELM support
- Add USB support
- Add USB-to-Ethernet support
12-Nov-2013
Initial release of U-Boot for CM-T335
U-Boot 2013.10-cm-t335-1 supports:
- MMC/SD Card
- NAND flash
- Multiple I2C buses
- CPSW Ethernet switch
- Green LED
- PCA953x GPIO extender