Difference between revisions of "U-Boot for CM-T3730"

From Compulab Mediawiki
Jump to: navigation, search
 
Line 14: Line 14:
  
 
{{ChangelogRss| content=
 
{{ChangelogRss| content=
* '''30-Aug-2011'''
+
===== 14-Nov-2012 =====
 +
: U-Boot update to 2012.07-cm-t3x-3:
 +
:- Add NAND support
 +
:- Add multiple environment storage support (MMC/NAND)
 +
:- Add multiple I2C buses support
 +
: X-Loader update to 1.51-cm-t3x-3
 +
:- Add support for various NAND chips
 +
 
 +
===== 30-Aug-2011 =====
 
: Initial release of U-Boot for CM-T3730
 
: Initial release of U-Boot for CM-T3730
 
: U-Boot 2011.06-cm-t3730-1 supports:
 
: U-Boot 2011.06-cm-t3730-1 supports:

Revision as of 14:47, 14 November 2012

The CompuLab CM-T3730 module is using U-Boot boot-loader for low-level initializations and operating system loading. U-Boot is an open source firmware for wide range of embedded systems (e.g. PowerPC, ARM, MIPS, x86, ColdFire, AVR32, NIOS, etc.). On this page we will discuss only features and use cases related to CompuLab CM-T3730 module. For more information on U-Boot, please refer to Official U-Boot Homepage.

Links to information about U-Boot package for CM-T3730 modules:

T3730-cm-top-m.jpg
News

14-Nov-2012
U-Boot update to 2012.07-cm-t3x-3:
- Add NAND support
- Add multiple environment storage support (MMC/NAND)
- Add multiple I2C buses support
X-Loader update to 1.51-cm-t3x-3
- Add support for various NAND chips
30-Aug-2011
Initial release of U-Boot for CM-T3730
U-Boot 2011.06-cm-t3730-1 supports:
- MMC/SD Card
- SMC911x Ethernet chip on CM-T3730
- SMC911x Ethernet chip on SB-T35
- Green LED
- System revision in ATAGS