Difference between revisions of "U-Boot for CM-X300"

From Compulab Mediawiki
Jump to: navigation, search
m (1 revision(s))
Line 7: Line 7:
  
 
Links to information about U-Boot package for CM-X300 modules:
 
Links to information about U-Boot package for CM-X300 modules:
* [[CM-X300 U-Boot Update]]
+
* [[CM-X300 U-Boot Update|Firmware Update]]
 +
* [[CM-X300: U-Boot: Firmware Development|Firmware Development]]
 
* [[U-Boot quick reference]]
 
* [[U-Boot quick reference]]
 
* [[U-Boot images]]
 
* [[U-Boot images]]
Line 13: Line 14:
 
|X300-cm-top-m.jpg|thumb}}
 
|X300-cm-top-m.jpg|thumb}}
  
{{Changelog|
+
{{ChangelogRss| content=
* '''2-Sep-2009'''
+
===== 10-Dec-2009 =====
 +
: Added [[CM-X300: U-Boot: Firmware Development]] article
 +
 
 +
===== 2-Sep-2009 =====
 
: U-Boot 2009.03-cm-x300-3 release
 
: U-Boot 2009.03-cm-x300-3 release
 
: - Added PXA310 USB support
 
: - Added PXA310 USB support
 
: - Green LED (for CM-X300 revision 1.3 and higher)
 
: - Green LED (for CM-X300 revision 1.3 and higher)
* '''27-May-2009'''
+
 
 +
===== 27-May-2009 =====
 
: Initial release of [[U-Boot for CM-X300]] documentation
 
: Initial release of [[U-Boot for CM-X300]] documentation
 
: U-Boot 2009.03-cm-x300-2 release supports:
 
: U-Boot 2009.03-cm-x300-2 release supports:
Line 28: Line 33:
 
: - System revision and serial number in ATAGS
 
: - System revision and serial number in ATAGS
 
}}
 
}}
 +
 +
 +
[[Category:U-Boot]]
 +
[[Category:CM-X300]]

Revision as of 15:33, 22 December 2009

The CompuLab CM-X300 module is using U-Boot boot-loader for low-level initializations and operating system loading. U-Boot is an open source firmware for wide range of embedded systems (e.g. PowerPC, ARM, MIPS, x86, ColdFire, AVR32, NIOS, etc.). On this page we will discuss only features and use cases related to CompuLab CM-X300 module. For more information on U-Boot, please refer to Official U-Boot Homepage.
The most recent CompuLab U-Boot version for CM-X300 is checked out from v2009.03 of Das U-Boot repository and can be obtained from CompuLab website in binary form. CompuLab U-Boot source will be provided on request.

Links to information about U-Boot package for CM-X300 modules:

X300-cm-top-m.jpg
News

10-Dec-2009
Added CM-X300: U-Boot: Firmware Development article
2-Sep-2009
U-Boot 2009.03-cm-x300-3 release
- Added PXA310 USB support
- Green LED (for CM-X300 revision 1.3 and higher)
27-May-2009
Initial release of U-Boot for CM-X300 documentation
U-Boot 2009.03-cm-x300-2 release supports:
- DA9030 power management chip
- DM9000A Ethernet chip
- PXA300 USB
- Onboard NAND chip
- Green LED (up to CM-X300 revision 1.2)
- System revision and serial number in ATAGS