UCM-iMX8M-Mini: Evaluation Kit: Getting Started

From Compulab Mediawiki
Revision as of 10:01, 3 March 2019 by imported>Igor.vaisbein (System setup)
Jump to: navigation, search

UCM-iMX8M-Mini-eval-kit-quick-setup.png

System setup

UCM-iMX8M-Mini evaluation kit is preloaded with Yocto Linux image for UCM-iMX8M-Mini.

  1. Make sure jumpers E6, E9, and E14 are populated (default state).
  2. Make sure jumpers E1, E4, E7, E8, E10, E12 and E15 are removed (default state).
  3. Connect the LCD panel (included in the kit) to connectors P22 and P45. Ensure that the flat cables are fully inserted.
  4. Connect a standard USB cable (included in the kit) between your host PC and the evaluation kit micro-USB2.0 connector P13.
  5. On your computer, start a terminal emulation program (such as HyperTerminal) with the following serial port settings:
Baud Rate Data Bits Stop Bits Parity Flow Control
115200 8 1 none none

Starting the system

  1. Connect the DC 12V power supply adapter (included) to main DC power connector J2.
  2. Follow the messages in your terminal emulator program until you see the linux login prompt.
  3. Use the credentials below to login.
  • username: root
  • without a password
Admolition note.png In case of no messages appear in your terminal emulation program, please refer to the detailed USB console guide.


What Next?