UCM-iMX8M-Mini: Yocto Linux: Installing Yocto images onto UCM-iMX8M-Mini eMMC
Revision as of 21:17, 15 February 2019 by imported>Kirill.kapranov
To install UCM-iMX8M-Mini Yocto Linux onto on-board eMMC or USB please use the `CompuLab Deployment Tool`.
The `CompuLab Deployment Tool` is a shell script that allow a user to deploy a working OS image from uSD card to internal storage of SoC (eMMC).
Follow the step-by-step procedure for a selected image:
Run Yocto Linux image you intend to deploy.
Depend on distribution you are using follow one of these instructions:
Installing Yocto images onto UCM-iMX8M-Mini eMMC using compulab-image-xfce
- Start `CompuLab Deployment Tool`
]
- Select an available destination:
ucm-imx8m-Mini eMMC device is mmcblk2
]
- Be aware of the fact that all the data on the destination will be erased
]
- The process runs: the output screen shows the log and progress
]
- At the end of the process this message shows up
]
Installing Yocto images onto UCM-iMX8M-Mini eMMC using fsl-image-validation-imx-xwayland
- Open up a teminal window and issue `cl-deploy`
]
- Select an available destination:
ucm-imx8m-Mini eMMC device is mmcblk2
]
- Be aware of the fact that all the data on the destination will be erased
]
- The process runs: the output screen shows the log and progress
]
- At the end of the process this message shows up
]
