UCM-iMX8M-Plus: Evaluation Kit: Getting Started

From Compulab Mediawiki
Jump to: navigation, search

UCM-iMX8Plus-eval-kit-quick-setup.png

System setup

UCM-iMX8Plus evaluation kit is preloaded with UCM-iMX8Plus Yocto Linux image.

  1. Make sure jumpers E6 and E9 are populated (default state).
  2. Make sure jumpers E20 is removed (default state).
  3. Optional - connect the LCD panel (if ordered with the kit) to connectors P11 and P5. Ensure that the flat cables are fully inserted.
  4. Connect a standard USB cable (included in the kit) between your host PC and the evaluation kit micro-USB2.0 connector P13.
  5. On your computer, start a terminal emulation program (such as HyperTerminal) with the following serial port settings:
Baud Rate Data Bits Stop Bits Parity Flow Control
115200 8 1 none none

Starting the system

  1. Connect the DC 12V power supply adapter (included) to main DC power connector J2.
  2. Follow the messages in your terminal emulator program until you see the linux shell command line prompt.
Admolition note.png In case of no messages appear in your terminal emulation program, please refer to the detailed USB console guide.


What Next?