UCM-iMX8M-Plus NXP iMX8M-Plus Linux Resources

From Compulab Mediawiki
Revision as of 13:08, 21 December 2022 by Igor (talk | contribs)
Jump to: navigation, search

This page contains links to information about Yocto Linux distribution for the CompuLab UCM-iMX8M-Plus ultra-compact System-on-Module / Computer-on-Module. The Yocto Project is an open-source collaboration focused on embedded Linux development.


UCM-iMX8M-Plus System-on-Module.png
Resources
Evaluation
Development
Application Notes


Release Notes

09-May-2022, UCM-iMX8M-Plus Yocto Linux release 1.1
Release of Yocto 3.3 (Hardknott) for UCM-iMX8M-Plus
- Based on NXP release lf-5.10.72-2.2.0
- Kernel 5.10.72
- U-Boot 2021.04
Supported HW features:
- Added support for UCM-iMX8M-Plus rev1.1
- Added support for Realtek RTL8211E PHY
- Added support for LDO control of secondary RGMII
10-Jun-2021, UCM-iMX8M-Plus Yocto Linux release 1.0
Release of Yocto 3.2 (gatesgarth) for UCM-iMX8M-Plus
- Based on NXP release lf-5.10.y-1.0.0
- Kernel 5.10.9
- U-Boot 2020.04
Supported HW features:
- Basic support for UCM-iMX8M-Plus
- USB2.0 OTG Host/Device
- USB3.0 Host
- PCIe, I2C, SPI
- Storage: eMMC, uSD, EEPROM
- Ethernet: Ethernet Quality Of Service (ENET_QOS)
- FlexCAN: can0, can1
- HDMI display interface
- LVDS display interface
- MIPI-DSI display interface
- Touch screen support
- CSI video camera interface
- SNVS RTC
- RTC
- Heartbeat LED
SW Features:
- CompuLab Deployment Tool
- CompuLab U-Boot Tool
- fw_printenv/fw_setenv/cl_setenv utilities provide R/W assess to U-Boot environment from Linux CLI
- Chromium browser
- Qt support
Boot-loader features:
- Supported memory configurations: 2GB, 4GB
- Supported boot-loader devices: SD, eMMC
- Supported linux/rootfs devices: SD, eMMC, USB, NFS
Documentation:
- Initial Yocto Linux documentation for UCM-iMX8M-Plus