View source for CL-SOM-iMX7: Linux: Creating Live-SD card

== Introduction ==
This article provides instructions on how to create the CL-SOM-iMX7 Live SD-card using a Linux host workstation. 
The Live SD card contains a complete boot stack including U-Boot, Linux kernel, device driver modules and root filesystem.

== Preparation steps ==
* Obtain a Linux PC workstation.
* Get a USB Card reader and an SD Card. Any commercially available SD card of 2GB (or larger) may be used for the installation.
* Download the CL-SOM-iMX7 BSP binary package from [https://www.compulab.com/products/computer-on-modules/cl-som-imx7-freescale-i-mx-7-system-on-module/#devres CompuLab website].
* Unzip the package to a directory on the host workstation.
* The Live SD-card image file will be located in the {{filename|images}} sub-directory. 
* Plug the USB SD Card reader into the host Linux PC. Insert the SD Card into the USB Card reader. In the following instructions it is assumed that the device name of the MMC/SD card on your Linux PC is {{filename|/dev/sdX}}.

=== Installation ===
* Burn the image file to the SD card:
<pre>
xz -dc ~/path/to/cl-som-imx7-bsp-bin/images/live.2G.cl-som-imx7.img.xz | sudo dd of=/dev/sdX bs=1M status=progress conv=fsync
</pre>

=== Run Live image ===
* Insert the SD card into the SD socket:
** on the SBC-iMX7 use (P9) SD socket
** on the SBC-IOT-iMX7 use (P18) micro SD socket
** on the IOT-GATE-iMX7 use socket marked '''uSD''' on the front panel
* Power-on the system.
* The Live SD-card image may require boot settings adjustment for proper boot.
* If needed, reset the U-Boot environment to default state in the U-Boot prompt:
<pre>
CL-SOM-iMX7 # env default -a
</pre>
* Start the boot process:
<pre>
CL-SOM-iMX7 # boot
</pre>

[[Category:Linux]]
[[Category:CL-SOM-iMX7]]
[[Category:IOT-GATE-iMX7]]
[[Category:SBC-IOT-iMX7]]