View source for CM-T335: Evaluation Kit: Getting Started

[[Image:CM-T335-eval-kit-quick-setup.jpg|800px]]

== System setup ==
# Connect the serial cable included in the evaluation kit to connector '''P11''' on the SB-T335. The other end of the cable should be connected to any COM port of a PC or other workstation.
# On your computer, start a terminal emulation program (such as HyperTerminal) with the following serial port settings:
<blockquote>
{{:SB-SOM: serial port parameters table}}
</blockquote>

== Starting the system ==
# Connect the DC 12V power supply adapter (included) to main DC power connector '''J2'''.
# Follow the messages in your terminal emulator program until you see the linux login prompt. 
# Use the credentials below to login.
:* username: root
:* password: 111111

== What Next? ==
* [[CM-T335_TI_AM335x_Linux|CM-T335 Linux guide]]
* [[CM-T335_TI_AM335x_Android|CM-T335 Android guide]]
* [[CM-T335 Windows Embedded Compact 7|CM-T335 Windows Embedded Compact 7 guide]]
* [[CM-T335:_Evaluation_Kit:_Hardware_Guide|CM-T335 evaluation kit hardware guide]]
* [http://www.compulab.co.il/products/computer-on-modules/cm-t335/#devres CM-T335 development resources]

[[Category:SB-T335]]
[[Category:CM-T335]]