CM-T335: Evaluation Kit: Getting Started

From Compulab Mediawiki
Jump to: navigation, search

CM-T335-eval-kit-quick-setup.jpg

System setup

  1. Connect the serial cable included in the evaluation kit to connector P11 on the SB-T335. The other end of the cable should be connected to any COM port of a PC or other workstation.
  2. On your computer, start a terminal emulation program (such as HyperTerminal) with the following serial port settings:
Baud Rate Data Bits Stop Bits Parity Flow Control
115200 8 1 none none

Starting the system

  1. Connect the DC 12V power supply adapter (included) to main DC power connector J2.
  2. Follow the messages in your terminal emulator program until you see the linux login prompt.
  3. Use the credentials below to login.
  • username: root
  • password: 111111

What Next?