Difference between revisions of "CL-SOM-iMX7 NXP i.MX7 U-Boot"
Line 28: | Line 28: | ||
: U-Boot 2017.07-cl-som-imx7-1.1 for CL-SOM-iMX7 / IOT-GATE-iMX7 / SBC-IOT-iMX7 | : U-Boot 2017.07-cl-som-imx7-1.1 for CL-SOM-iMX7 / IOT-GATE-iMX7 / SBC-IOT-iMX7 | ||
: - Added conditional initialization of the base board I2C bus | : - Added conditional initialization of the base board I2C bus | ||
− | : - Improved | + | : - Improved SPI flash support coverage |
: Documentation | : Documentation | ||
: - Updated multiple articles to comply with the new U-Boot package | : - Updated multiple articles to comply with the new U-Boot package |
Revision as of 08:18, 18 December 2017
The CompuLab CL-SOM-iMX7 System-on-Module / Computer-on-Module is using U-Boot boot-loader for low-level initializations and operating system loading.
U-Boot is an open source firmware for wide range of embedded systems (e.g. PowerPC, ARM, MIPS, x86, ColdFire, AVR32, NIOS, etc.).
On this page we will discuss only features and use cases related to CompuLab CL-SOM-iMX7 module.
For more information on U-Boot, please refer to Official U-Boot Homepage. |
Resources | |||
|
| ||
18-Dec-2017, CL-SOM-iMX7 / IOT-GATE-iMX7 / SBC-IOT-iMX7 U-Boot release 1.1
24-Oct-2017, CL-SOM-iMX7 / IOT-GATE-iMX7 / SBC-IOT-iMX7 U-Boot release 1.0
07-Dec-2016, CL-SOM-iMX7 U-Boot release
|