Difference between revisions of "U-Boot for CM-T335"

From Compulab Mediawiki
Jump to: navigation, search
Line 1: Line 1:
 
{{summary|
 
{{summary|
−
The CompuLab CM-T335 module is using U-Boot boot-loader for low-level initializations and operating system loading.
+
The CompuLab CM-T335 System-on-Module / Computer-on-Module is using U-Boot boot-loader for low-level initializations and operating system loading.
 
U-Boot is an open source firmware for wide range of embedded systems (e.g. PowerPC, ARM, MIPS, x86, ColdFire, AVR32, NIOS, etc.).
 
U-Boot is an open source firmware for wide range of embedded systems (e.g. PowerPC, ARM, MIPS, x86, ColdFire, AVR32, NIOS, etc.).
 
On this page we will discuss only features and use cases related to CompuLab CM-T335 module.
 
On this page we will discuss only features and use cases related to CompuLab CM-T335 module.

Revision as of 11:47, 4 November 2014

The CompuLab CM-T335 System-on-Module / Computer-on-Module is using U-Boot boot-loader for low-level initializations and operating system loading. U-Boot is an open source firmware for wide range of embedded systems (e.g. PowerPC, ARM, MIPS, x86, ColdFire, AVR32, NIOS, etc.). On this page we will discuss only features and use cases related to CompuLab CM-T335 module. For more information on U-Boot, please refer to Official U-Boot Homepage.

Cm-t335-top.jpg


Resources
Evaluation

Linux installation icon.png


Development

Development Icon.png


Troubleshooting

Support Icon.png



News
Feed-icon.png RSS Feed

14-Sep-2014
U-Boot update to v2014.04-cm-t335-2.2:
- DRAM configuration fine tuning
02-Apr-2014
U-Boot update to v2014.01-cm-t335-2:
- Add ELM support
- Add USB support
- Add USB-to-Ethernet support
12-Nov-2013
Initial release of U-Boot for CM-T335
U-Boot 2013.10-cm-t335-1 supports:
- MMC/SD Card
- NAND flash
- Multiple I2C buses
- CPSW Ethernet switch
- Green LED
- PCA953x GPIO extender

Retrieved from "https://mediawiki.compulab.com/w/index.php?title=U-Boot_for_CM-T335&oldid=1861"