U-Boot for CM-T335

The CompuLab CM-T335 module is using U-Boot boot-loader for low-level initializations and operating system loading. U-Boot is an open source firmware for wide range of embedded systems (e.g. PowerPC, ARM, MIPS, x86, ColdFire, AVR32, NIOS, etc.). On this page we will discuss only features and use cases related to CompuLab CM-T335 module. For more information on U-Boot, please refer to Official U-Boot Homepage.

Resources

Evaluation Firmware Overview Firmware Update U-Boot quick reference Development Building Firmware images U-Boot images U-Boot documentation Troubleshooting Support

News RSS Feed

14-Sep-2014 U-Boot update to v2014.04-cm-t335-2.2: - DRAM configuration fine tuning 02-Apr-2014 U-Boot update to v2014.01-cm-t335-2: - Add ELM support - Add USB support - Add USB-to-Ethernet support 12-Nov-2013 Initial release of U-Boot for CM-T335 U-Boot 2013.10-cm-t335-1 supports: - MMC/SD Card - NAND flash - Multiple I2C buses - CPSW Ethernet switch - Green LED - PCA953x GPIO extender