Difference between revisions of "SB-SOM: Connectors: J5"
| Line 9: | Line 9: | ||
Only one of the following SB-SOM display interfaces can be driven with the system-on-module parallel RGB interface at a time. Driving more than one of the below simultaneously is in most cases unsupported. | Only one of the following SB-SOM display interfaces can be driven with the system-on-module parallel RGB interface at a time. Driving more than one of the below simultaneously is in most cases unsupported. | ||
:* A DVI/HDMI display at connector J5. | :* A DVI/HDMI display at connector J5. | ||
| − | :* An LVDS display at connector P11 (if implemented through parallel RGB interface with your specific SB-SOM board). | + | :* An LVDS display at connector '''P11''' (if implemented through parallel RGB interface with your specific SB-SOM board). |
| − | :* An LCD display at connector P10. | + | :* An LCD display at connector '''P10'''. |
{{note|Selection of the parallel RGB interface path (DVI/LVDS/LCD) must be implemented through system-on-module software.}} | {{note|Selection of the parallel RGB interface path (DVI/LVDS/LCD) must be implemented through system-on-module software.}} | ||
Latest revision as of 06:56, 25 May 2016
Description
Connector J5 is a standard HDMI (output) connector compatible with HDMI/DVI displays. Connector J5 is available only in case parallel RGB interface is available at "PDISP" pins of system-on-module. Connector J5 enables simple connection of DVI/HDMI displays with the system.
Only one of the following SB-SOM display interfaces can be driven with the system-on-module parallel RGB interface at a time. Driving more than one of the below simultaneously is in most cases unsupported.
- A DVI/HDMI display at connector J5.
- An LVDS display at connector P11 (if implemented through parallel RGB interface with your specific SB-SOM board).
- An LCD display at connector P10.
|
Selection of the parallel RGB interface path (DVI/LVDS/LCD) must be implemented through system-on-module software. |
|
|
Connector J5, although compatible with HDMI displays, implements only DVI data (no audio etc..). |
|
|
Please refer to SB-SOM carrier board schematics and system-on-module hardware reference manual for pin functions, connector pinout and other details on your specific system. |
More Details: Connector P11, Connector P10.
Connector Data
J5 connector Manufacturer MFG P/N Antenk HLHDMIAFCG1NTRA
J5 mating plugs Manufacturer MFG P/N Standard HDMI plug
