CM-T43: Evaluation Kit: Getting Started

SB-SOM top view

System setup

SB-SOM bottom view

CM-T43 evaluation kit contains an SD card preloaded with Debian Linux image for CM-T43.

1. Insert the evaluation kit SD card into the SD/MMC/SDIO socket P9 until you hear a clicking sound.
2. Make sure jumpers E3 and E1 are not populated (default state).
3. Connect the standard USB cable (included) between your host PC and the evaluation kit micro-USB2.0 connector P7.
4. On your computer, start a terminal emulation program (such as HyperTerminal) with the following serial port settings:

Baud Rate	Data Bits	Stop Bits	Parity	Flow Control
115200	8	1	none	none

Starting the system

1. Connect the DC 12V power supply adapter (included) to J6.
2. Follow the messages in your terminal emulator program until you see the linux login prompt.
3. NOTE: in case no messages appear in your terminal emulation program, please refer to the detailed USB console guide.
4. Use the credentials below to login.

• username: root
• password: 111111

What Next?

• CM-T43 Linux guide
• CM-T43 Yocto guide
• CM-T43 evaluation kit hardware guide
• CM-T43 development resources