Description
Connector J5 is a standard HDMI (output) connector compatible with HDMI/DVI displays.
Connector J5 is available only in case parallel RGB interface is available at "PDISP" pins of system-on-module.
Connector J5 enables simple connection of DVI/HDMI displays with the system.
Only one of the following SB-SOM display interfaces can be driven with the system-on-module parallel RGB interface at a time. Driving more than one of the below simultaneously is in most cases unsupported.
- A DVI/HDMI display at connector J5.
- An LVDS display at connector P11 (if implemented through parallel RGB interface with your specific SB-SOM board).
- An LCD display at connector P10.
|
Selection of the parallel RGB interface path (DVI/LVDS/LCD) must be implemented through system-on-module software.
|
|
|
Connector J5, although compatible with HDMI displays, implements only DVI data (no audio etc..).
|
|
|
Please refer to SB-SOM carrier board schematics and system-on-module hardware reference manual for pin functions, connector pinout and other details on your specific system.
|
More Details: Connector P11, Connector P10.
Connector Data
| J5 connector
|
| Manufacturer
|
MFG P/N
|
| Antenk
|
HLHDMIAFCG1NTRA
|
|
|
| J5 mating plugs
|
| Manufacturer
|
MFG P/N
|
| Standard HDMI plug
|
|
