CL-SOM-iMX7 NXP i.MX7 U-Boot

The CompuLab CL-SOM-iMX7 System-on-Module / Computer-on-Module is using U-Boot boot-loader for low-level initializations and operating system loading. U-Boot is an open source firmware for wide range of embedded systems (e.g. PowerPC, ARM, MIPS, x86, ColdFire, AVR32, NIOS, etc.). On this page we will discuss only features and use cases related to CompuLab CL-SOM-iMX7 module. For more information on U-Boot, please refer to Official U-Boot Homepage.

Resources

Evaluation Firmware Overview Package contents Firmware Update Creating a bootable SD card Basic environment configuration Display and console U-Boot: Quick reference Development Setting up a development environment Introduction to U-Boot development Building Firmware images Building Secure Firmware images U-Boot: Images U-Boot documentation Troubleshooting Support Known Issues

News RSS Feed

02-Jul-2018, CL-SOM-iMX7 / IOT-GATE-iMX7 / SBC-IOT-iMX7 U-Boot release 1.5 U-Boot 2017.07-cl-som-imx7-1.5 for CL-SOM-iMX7 / IOT-GATE-iMX7 / SBC-IOT-iMX7 - Fixed USB reset command - Fixed USB hub initialization Documentation - Updated multiple articles to comply with the new U-Boot package 27-May-2018, CL-SOM-iMX7 / IOT-GATE-iMX7 / SBC-IOT-iMX7 U-Boot release 1.4 U-Boot 2017.07-cl-som-imx7-1.4 for CL-SOM-iMX7 / IOT-GATE-iMX7 / SBC-IOT-iMX7 - Added support for SOC revision 1.3 - Added USB to Ethernet drivers Documentation - Updated multiple articles to comply with the new U-Boot package 21-Mar-2018, CL-SOM-iMX7 / IOT-GATE-iMX7 / SBC-IOT-iMX7 U-Boot release 1.3 U-Boot 2017.07-cl-som-imx7-1.3 for CL-SOM-iMX7 / IOT-GATE-iMX7 / SBC-IOT-iMX7 - Added support for SB-IOT baseboard - Enabled environment import/export - Improved DRAM detection - Improved baseboard I2C handling - Fixed USB and SD card auto boot Documentation - Updated multiple articles to comply with the new U-Boot package 18-Dec-2017, CL-SOM-iMX7 / IOT-GATE-iMX7 / SBC-IOT-iMX7 U-Boot release 1.1 U-Boot 2017.07-cl-som-imx7-1.1 for CL-SOM-iMX7 / IOT-GATE-iMX7 / SBC-IOT-iMX7 - Added conditional initialization of the base board I2C bus - Improved SPI flash support coverage Documentation - Updated multiple articles to comply with the new U-Boot package 24-Oct-2017, CL-SOM-iMX7 / IOT-GATE-iMX7 / SBC-IOT-iMX7 U-Boot release 1.0 U-Boot 2017.07-cl-som-imx7-1.0 for CL-SOM-iMX7 / IOT-GATE-iMX7 / SBC-IOT-iMX7 - Added SPL support - Added automatic RAM detection - Added LCD/DVI support with example presets - Added Splash screen / Logo with video console - Added USB keyboard support - Added Secondary Ethernet interface support - Added EEPROM layout commands - Added automatic device tree (dtb) selection - Improved NAND flash support coverage - Fixed NAND bitflip for erased page - Fixed NAND ECC strength calculation Documentation - Updated multiple articles to comply with the new U-Boot package 07-Dec-2016, CL-SOM-iMX7 U-Boot release Initial pre-release of U-Boot 2016.09-cl-som-imx7-0.91 for CL-SOM-iMX7 - MMC/SD Card - eMMC - SPI flash - NAND flash - Ethernet - USB host and USB OTG in host mode - Multiple I2C buses - Green LED Documentation - Initial U-Boot documentation for CL-SOM-iMX7 support