SBC-IOT-IMX8PLUS: Getting Started

From Compulab Mediawiki
Revision as of 12:30, 6 July 2022 by Igor (talk | contribs) (Created page with "= Quick Setup = * Connect a USB cable between host PC and SBC-IOT-IMX8PLUS micro-USB console connector. * Insert the AC power-supply blade into the power supply unit. * Inser...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Quick Setup

  • Connect a USB cable between host PC and SBC-IOT-IMX8PLUS micro-USB console connector.
  • Insert the AC power-supply blade into the power supply unit.
  • Insert the power supply plug into the SBC-IOT-IMX8PLUS DC input jack. Turn the power plug clockwise to lock the plug.
  • On your host PC, start a terminal emulation program (such as HyperTerminal) with the following serial port settings:
Baud Rate Data Bits Stop Bits Parity Flow Control
115200 8 1 none none
  • Plug the power supply unit into an AC outlet. SBC-IOT-IMX8PLUS will turn on and boot into Linux.
  • To login into Linux use "compulab" as username and set the password per first login instructions.

SBC-IOT-IMX8PLUS Overview

Panel connectors

Sbc-iot-imx8plus panel-connectors.png

Internal connectors

Sbc-iot-imx8plus internal-connectors.png
Retrieved from "https://mediawiki.compulab.com/w/index.php?title=SBC-IOT-IMX8PLUS:_Getting_Started&oldid=5011"