EM-X270 WinCE

This page contains links to information related to the Windows Embedded CE 6.0 R3 demo package for the EM-X270 CompuLab Windows CE support includes a ready to run demo image, an SDK that enables application development, and a BSP that allows you to customize the run-time image

Resources

Evaluation Getting started Using the Demo Image Development Application Development Platform Builder Installation OSDesign Configuration OSDesign Creation Troubleshooting Installation Troubleshooting Support

News RSS Feed

8-Apr-2010 (Release: 1.01.2719) Fixed RTC synchronization issue during Suspend/Resume cycles Added support for the unique Bluetooth MAC address (burned during CompuLab production) for each EM-X270. Added the new demo image versioning policy (1.01.SVN release) Added the new Updater for the Eval Kit installation Rebuilt with WinCE 6.0 R3 including the Silverlight support 29-Dec-2008 Added support for the SDHC Memory Cards Added support for the debug messages control via U-Boot environment Added advanced functionality to the Image Updater, including batch script processing (xml based) and update of Nk.bin only Changed the Demo Distribution binary format to NK.bin, in order to allow post processing of NK.bin by the customer Fixed Image Updater NAND Flash recognition issues Fixed Constant Voltage charging issues Fixed internal RTC accuracy Fixed GPS power up sequence for Rev 1.3 and higher 29-Oct-2008 Document reformatted 16-Sep-2008 Added Demo Distribution versioning support Added support for EM-X270 Rev 1.3 and higher - Added support for Marvell 8686 SPI Wi-Fi - Updated ComConfig control panel applet to support different Wi-Fi types (NXP BGW200 or Marvell GSPI8686) Moved to Microsoft FAL/FMD Flash Driver model - Added FMD support into EM-X270-Updater - Added FMD support into bootloader – U-Boot/Eboot combination is used to boot/debug WinCE Added support for EM-X270 Rev 1.3 and higher Fixed GPRS/GSM startup issues for Rev 1.2 and higher 16-Jun-2008 Fixed rare 22 min system freezes Fixed rare Software Reset freezes Updated NAND Flash driver flush timings to improve stability Updated battery driver for Constant Voltage charging functionality Updated touch screen driver to use pen down interrupt generated by the codec (instead of polling) Added GSM demo dialer application, in "Start >> Programs >> Demo Dialer" Added GPRS demo dialer in "Start >> Settings >> Network and Dialup >> GPRS" Added "wpower.exe" subproject utility for command line control of the wireless devices power state Added automatic wireless devices power state preserving during reboot (with wpower.exe utility) Added functionality for AutoLaunch subproject (mostly for internal BSP use) Cleaned to pass Windows CE 6.0 CETK BSP certification 18-Mar-2008 Fixed battery charging issues Fixed CPU clock speed setting on return from suspend mode Fixed keypad behavior when button is pressed for a long period of time Fixed Wireless Config control panel applet - WLAN does not load on startup by default - Power on/off control for all wireless devices Fixed power consumption in Suspend mode (total power down of all devices) Fixed Debug messages disappearing after Suspend/Resume cycle Fixed spurious wakeup from sleep, while on battery power Switching to FIXTICK system timer model for greater system stability Added power control for EM-X270 default LCD. Added USB OTG capability Added SPI driver Added SPI Thermometer sample (Demo Applications\SPI_Thermometer) Added Deployment Functionality for the LiveDisk Updater Added \Docs\EM-X270 Deployment Guide.doc Added Bluetooth Evaluation Section Added GPRS/GSM Evaluation Section Added GPS Evaluation Section Updated EM_X270_SDK. 19-Dec-2007 Demo Distribution was rebuilt using WinCE 6.0 R2 Added Serial port support Added Wireless Config control panel applet Added U-Boot command line support Added GPIOSample at \Demo Applications\GPIOSample Added I2Csample at \Demo Applications\I2Csample Added RTC Alarm Sample at \Demo Applications\RTCResume 14-Nov-2007 First Release of Win CE 6.0 for EM-X270