CM-iGT: BIOS Update

Update using an external USB Flash Device

Preparing the BIOS Updater

1. Download the CM-iGT BIOS Updater package.
2. Connect the USB Flash Drive (UFD) to your host PC
   Important Note:Ensure that you don't have any other USB mass storage devices connected
3. Run Win32DiskImager.exe
4. Select the target disk in the Device drop-box
5. Select the extracted iGT_Bios_Updater.img in the Image File search-box
6. Press Write button to proceed
7. Wait until completion
8. Disconnect the UFD from your host PC

Updating the BIOS

1. On the SB-iGT carrier board, make sure that pins 5 and 6 in JP1 are shorted.
2. Connect the previously created UFD to the SB-iGT and power on the system.
3. The system boots to DOS.
4. Type "flash.bat".
5. Wait for completion.
6. Ensure there are no error messages during the update process.