Quick Setup

Connect micro USB cable between host PC and IOT-GATE-iMX8 micro-USB console connector.
Insert the AC power-supply blade into the power supply unit.
Insert the power supply plug into the IOT-GATE-iMX8 DC input jack. Turn the power plug clockwise to lock the plug.
On your host PC, start a terminal emulation program (such as HyperTerminal) with the following serial port settings:

Baud Rate Data Bits Stop Bits Parity Flow Control

115200 8 1 none none

Plug the power supply unit into an AC outlet. IOT-GATE-iMX8 will turn on and boot into Linux.
To login into Linux use "compulab" as username and set the password per first login instructions.