Difference between revisions of "IOT-GATE-iMX8: Getting Started"

From Compulab Mediawiki
Jump to: navigation, search
imported>Igor.vaisbein
(Created page with "== IOT-GATE-iMX8 Overview == === Front and Rear panels === : 1400px === Left and Right panels === : Image:Iot-gate-imx8 l...")
 
imported>Igor.vaisbein
Line 1: Line 1:
−
== IOT-GATE-iMX8 Overview ==
+
= Quick Setup =
 +
 
 +
* Connect micro USB cable between host PC and IOT-GATE-iMX8 micro-USB console connector.
 +
* Insert the AC power-supply blade into the power supply unit.
 +
* Insert the power supply plug into the IOT-GATE-iMX8 DC input jack. Turn the power plug clockwise to lock the plug.
 +
* On your host PC, start a terminal emulation program (such as HyperTerminal) with the following serial port settings:
 +
<blockquote>
 +
{{:SB-SOM: serial port parameters table}}
 +
</blockquote>
 +
* Plug the power supply unit into an AC outlet. IOT-GATE-iMX8 will turn on and boot into Linux.
 +
* Use "root" as a username and "111111" as a password as initial Linux account credentials.
 +
 
 +
= IOT-GATE-iMX8 Overview =
  
 
=== Front and Rear panels ===
 
=== Front and Rear panels ===
 
: [[Image:Iot-gate-imx8 front-and-back-panels.png|1400px]]
 
: [[Image:Iot-gate-imx8 front-and-back-panels.png|1400px]]
 +
 
=== Left and Right panels ===
 
=== Left and Right panels ===
 
:  [[Image:Iot-gate-imx8 left-and-right-panels.png‎|1400px]]
 
:  [[Image:Iot-gate-imx8 left-and-right-panels.png‎|1400px]]
Line 28: Line 41:
 
=== Service bay ===
 
=== Service bay ===
 
: [[Image:Iot-gate-imx8 service-bay.png‎|800px]]
 
: [[Image:Iot-gate-imx8 service-bay.png‎|800px]]
−
 
−
== Quick Setup ==
 
−
 
−
* Connect micro USB cable between host PC and IOT-GATE-iMX8 micro-USB console connector.
 
−
* Insert the AC power-supply blade into the power supply unit.
 
−
* Insert the power supply plug into the IOT-GATE-iMX8 DC input jack. Turn the power plug clockwise to lock the plug.
 
−
* On your host PC, start a terminal emulation program (such as HyperTerminal) with the following serial port settings:
 
−
<blockquote>
 
−
{{:SB-SOM: serial port parameters table}}
 
−
</blockquote>
 
−
* Plug the power supply unit into an AC outlet. IOT-GATE-iMX8 will turn on and boot into Linux.
 
−
* Use "compulab" as a username and "compulab" as a password as initial Linux account credentials.
 
  
  
 
[[Category:IOT-GATE-iMX8]]
 
[[Category:IOT-GATE-iMX8]]

Revision as of 12:33, 5 May 2020

Quick Setup

  • Connect micro USB cable between host PC and IOT-GATE-iMX8 micro-USB console connector.
  • Insert the AC power-supply blade into the power supply unit.
  • Insert the power supply plug into the IOT-GATE-iMX8 DC input jack. Turn the power plug clockwise to lock the plug.
  • On your host PC, start a terminal emulation program (such as HyperTerminal) with the following serial port settings:
Baud Rate Data Bits Stop Bits Parity Flow Control
115200 8 1 none none
  • Plug the power supply unit into an AC outlet. IOT-GATE-iMX8 will turn on and boot into Linux.
  • Use "root" as a username and "111111" as a password as initial Linux account credentials.

IOT-GATE-iMX8 Overview

Front and Rear panels

Iot-gate-imx8 front-and-back-panels.png

Left and Right panels

Iot-gate-imx8 left-and-right-panels.png


Default antenna connector assignment


Connector Function
ANT1 WiFi/BT AUX antenna
ANT2 WiFi/BT MAIN antenna
ANT3 Modem GNSS antenna
ANT4 Modem MAIN antenna


Service bay

Iot-gate-imx8 service-bay.png
Retrieved from "https://mediawiki.compulab.com/w/index.php?title=IOT-GATE-iMX8:_Getting_Started&oldid=4592"