SBC-IOT-iMX8: Getting Started
From Compulab Mediawiki
Quick Setup
- Connect micro USB cable between host PC and the SBC-IOT-iMX8 micro-USB debug console connector.
- Insert the AC power-supply blade into the power supply unit.
- Insert the power supply plug into the SBC-IOT-iMX8 DC input jack.
- On your host PC, start a terminal emulation program (such as HyperTerminal) with the following serial port settings:
| Baud Rate
|
Data Bits
|
Stop Bits
|
Parity
|
Flow Control
|
| 115200
|
8
|
1
|
none
|
none
|
- Plug the power supply unit into an AC outlet. SBC-IOT-iMX8 will turn on and boot into Linux.
- Use "root" as a username and "111111" as a password as initial Linux account credentials.
SBC-IOT-iMX8 Connectors
