UCM-iMX7 NXP i.MX7 Linux

This page contains links to information about Linux kernels, packages and software development for the CompuLab UCM-iMX7 System-on-Module / Computer-on-Module. CompuLab Linux support for UCM-iMX7 includes modifications of Linux kernel and an example file system image based on ARM Debian Linux. It is also possible to use other embedded Linux distributions and environments with UCM-iMX7.

Resources

Evaluation Getting started with UCM-iMX7 Evaluation Kit Automatic Linux installation on UCM-iMX7 Manual Linux installation on UCM-iMX7 Linux package contents Debian Linux for UCM-iMX7 Development Setting up a development environment Introduction to Linux development Introduction to device trees Linux Kernel for UCM-iMX7 Minimal Debian ARM filesystem Troubleshooting Support Known Issues

News RSS Feed

18-Jun-2017, UCM-iMX7 Linux release 1.0 Initial release of Linux kernel v4.1.15-ucm-imx7-1.0 and Debian 8 Linux Demo image for UCM-iMX7 - Basic support for the UCM-iMX7 module and SB-UCM base board - Serial console support on UART1 - Green LED - MMC/SD, eMMC, USB, I2C, SPI - Storage: NAND, SPI flash, MMC/SD, USB - Freescale Ethernet Controller (FEC1) - PCIe - TSC2046 resistive touch panel controller support - HannStar HSD050IDW1/Startek KD050C-1A LCD panel support - PWM backlight for LCD - DVI display - AB1805 RTC support - Analog Audio - BCM4343W WiFi and Bluetooth - 2x CAN bus (FLEXCAN1 and FLEXCAN2) - Watchdog WD1 Documentation - Initial Linux documentation for UCM-iMX7 support