UCM-iMX8M-Plus NXP iMX8M-Plus Linux Resources

This page contains links to information about Yocto Linux distribution for the CompuLab UCM-iMX8M-Plus ultra-compact System-on-Module / Computer-on-Module. The Yocto Project is an open-source collaboration focused on embedded Linux development.

Resources

Evaluation Getting started with UCM-iMX8M-Plus Evaluation Kit Installing Yocto on SD card Installing Yocto onto UCM-iMX8M-Plus eMMC UCM-iMX8M-Plus Linux how-to guide Yocto Linux package contents Known Issues Development Building UCM-iMX8M-Plus Yocto Linux images Building UCM-iMX8M-Plus Linux Kernel Building UCM-iMX8M-Plus boot firmware Introduction to Yocto development Making Changes to Yocto Meta-Layers Application Notes Developing with Qt on CompuLab platforms Optimizing eMMC lifetime and reliability Creating OTA update enabled images with Mender Enabling secure boot (HAB) in Yocto

Release Notes RSS Feed

10-Jun-2021, UCM-iMX8M-Plus Yocto Linux release 1.0 Release of Yocto 3.2 (gatesgarth) for UCM-iMX8M-Plus - Based on NXP release lf-5.10.y-1.0.0 - Kernel 5.10.9 - U-Boot 2020.04 Supported HW features: - Basic support for UCM-iMX8M-Plus - USB2.0 OTG Host/Device - USB3.0 Host - PCIe, I2C, SPI - Storage: eMMC, uSD, EEPROM - Ethernet: Ethernet Quality Of Service (ENET_QOS) - FlexCAN: can0, can1 - HDMI display interface - LVDS display interface - MIPI-DSI display interface - Touch screen support - CSI video camera interface - SNVS RTC - RTC - Heartbeat LED SW Features: - CompuLab Deployment Tool - CompuLab U-Boot Tool - fw_printenv/fw_setenv/cl_setenv utilities provide R/W assess to U-Boot environment from Linux CLI - Chromium browser - Qt support Boot-loader features: - Supported memory configurations: 2GB, 4GB - Supported boot-loader devices: SD, eMMC - Supported linux/rootfs devices: SD, eMMC, USB, NFS Documentation: - Initial Yocto Linux documentation for UCM-iMX8M-Plus